[PATCH v3] travis: add basic CI support

Jan Kiszka jan.kiszka at siemens.com
Mon Mar 18 15:24:08 CET 2019


On 18.03.19 15:21, Roman Stratiienko wrote:
> Hello Jan,
> 
> Build failure is caused by "cobalt: Add sched-quota tracepoints".
> I had to revert it to continue with testing
> 

Ah, that's a good trace.  We might be missing some include... One minute...

Jan

> You can check my fork:
> https://travis-ci.org/devel-opi/xenomai-fork
> https://github.com/devel-opi/xenomai-fork/commits/v4.20-fixes
> 
> I didn't test the commits separately, but they should not cause build fails when 
> applied one-by-one
> 
> If no more comments from your side, then other patches are final
> 
> Regards,
> Roman
> 
> On Mon, Mar 18, 2019 at 3:25 PM Jan Kiszka <jan.kiszka at siemens.com 
> <mailto:jan.kiszka at siemens.com>> wrote:
> 
>     On 18.03.19 13:59, Jan Kiszka wrote:
>      > On 11.03.19 15:37, roman.stratiienko--- via Xenomai wrote:
>      >> From: Roman Stratiienko <roman.stratiienko at globallogic.com
>     <mailto:roman.stratiienko at globallogic.com>>
>      >>
>      >> Signed-off-by: Roman Stratiienko <roman.stratiienko at globallogic.com
>     <mailto:roman.stratiienko at globallogic.com>>
>      >> ---
>      >>
>      >> Changes since v2
>      >>
>      >> Removed redundand "CONFIG_" prefix
>      >> Added building of the drivers
>      >>
>      >> Currently CAN bus driver build fails on v4.20 and v5.0,
>      >> (https://travis-ci.org/devel-opi/xenomai-fork/builds/504429157)
>      >>
>      >> Please suggest which configs should be also enabled in
>      >> CI to cover as much as possible code lines
>      >>
>      >>   .travis.yml | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>      >>   1 file changed, 99 insertions(+)
>      >>   create mode 100644 .travis.yml
>      >>
>      >> diff --git a/.travis.yml b/.travis.yml
>      >> new file mode 100644
>      >> index 000000000..8d3eba2c3
>      >> --- /dev/null
>      >> +++ b/.travis.yml
>      >> @@ -0,0 +1,99 @@
>      >> +language: c
>      >> +dist: xenial
>      >> +
>      >> +addons:
>      >> +  apt:
>      >> +    packages:
>      >> +      - gcc-aarch64-linux-gnu
>      >> +      - gcc-arm-linux-gnueabihf
>      >> +      - patch
>      >> +      - quilt
>      >> +      - wget
>      >> +
>      >> +env:
>      >> +  global:
>      >> +    - KDIR=/tmp/kernel
>      >> +
>      >> +install:
>      >> +  - if [[ "${KERNEL_VERSION}" == *-rc* ]]; then
>      >> +
>      >>
>     KERNEL_URL=https://git.kernel.org/torvalds/t/linux-${KERNEL_VERSION}.tar.gz
>     <https://git.kernel.org/torvalds/t/linux-$%7BKERNEL_VERSION%7D.tar.gz>;
>      >> +    else
>      >> +
>      >>
>     KERNEL_URL=https://www.kernel.org/pub/linux/kernel/v${KERNEL_VERSION::1}.x/linux-${KERNEL_VERSION}.tar.xz
>     <https://www.kernel.org/pub/linux/kernel/v$%7BKERNEL_VERSION::1%7D.x/linux-$%7BKERNEL_VERSION%7D.tar.xz>;
> 
>      >>
>      >> +    fi
>      >> +  - wget -O kernel.tar.xz ${KERNEL_URL} && mkdir ${KDIR} && tar -C ${KDIR}
>      >> --strip=1 -xf kernel.tar.xz
>      >> +  - wget -O /tmp/ipipe.patch ${IPIPE_URL}
>      >> +
>      >> +before_script:
>      >> +  - case "${ARCH}" in
>      >> +      "arm64") export CROSS_COMPILE=aarch64-linux-gnu-
>      >> +          ;;
>      >> +      "arm"  ) export CROSS_COMPILE=arm-linux-gnueabihf-
>      >> +          ;;
>      >> +      "x86"  ) export CROSS_COMPILE=
>      >> +          ;;
>      >> +    esac
>      >> +  - pushd ${KDIR}
>      >> +  - make -j $(nproc) ${KERNEL_DEFCONFIG}
>      >> +  - ./scripts/config -e IPIPE
>      >> +  - ./scripts/config -e XENOMAI
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_DEBUG
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_DEBUG_FTRACE
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_8255
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_PARPORT
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_NI_MITE
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_NI_TIO
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_NI_MIO
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_NI_PCIMIO
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_NI_670x
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_NI_660x
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_S526
>      >> +  - ./scripts/config -e XENO_DRIVERS_ANALOGY_FAKE
>      >> +  - ./scripts/config -e XENO_DRIVERS_AUTOTUNE
>      >> +  - ./scripts/config -e XENO_DRIVERS_CAN
>      >> +  - ./scripts/config -e XENO_DRIVERS_CAN_DEBUG
>      >> +  - ./scripts/config -e XENO_DRIVERS_CAN_LOOPBACK
>      >> +  - ./scripts/config -e XENO_DRIVERS_CAN_BUS_ERR
>      >> +  - ./scripts/config -e XENO_DRIVERS_CAN_VIRT
>      >> +  - ./scripts/config -e XENO_DRIVERS_CAN_FLEXCAN
>      >> +  - ./scripts/config -e XENO_DRIVERS_GPIO
>      >> +  - ./scripts/config -e XENO_DRIVERS_GPIO_SUN8I_H3
>      >> +  - ./scripts/config -e XENO_DRIVERS_GPIO_DEBUG
>      >> +  - ./scripts/config -e XENO_DRIVERS_GPIOPWM
>      >> +  - ./scripts/config -e XENO_DRIVERS_RTIPC
>      >> +  - ./scripts/config -e XENO_DRIVERS_NET
>      >> +  - ./scripts/config -e XENO_DRIVERS_16550A
>      >> +  - ./scripts/config -e XENO_DRIVERS_SPI
>      >> +  - ./scripts/config -e XENO_DRIVERS_TIMERBENCH
>      >> +  - ./scripts/config -e XENO_DRIVERS_UDD
>      >> +
>      >> +  - popd
>      >> +
>      >> +script:
>      >> +  - ./scripts/prepare-kernel.sh --ipipe=/tmp/ipipe.patch --arch=${ARCH}
>      >> --linux=${KDIR}
>      >> +  - cd ${KDIR}
>      >> +  - make -j $(nproc) olddefconfig
>      >> +  - make -j $(nproc) all
>      >> +
>      >> +matrix:
>      >> +  include:
>      >> +    - env:
>      >> +      - ARCH: arm
>      >> +        KERNEL_VERSION: 4.14.85
>      >> +        KERNEL_DEFCONFIG: multi_v7_defconfig
>      >> +        IPIPE_URL:
>      >> https://xenomai.org/downloads/ipipe/v4.x/arm/ipipe-core-4.14.85-arm-6.patch
>      >> +    - env:
>      >> +      - ARCH: arm
>      >> +        KERNEL_VERSION: 4.1.18
>      >> +        KERNEL_DEFCONFIG: multi_v7_defconfig
>      >> +        IPIPE_URL:
>      >>
>     https://xenomai.org/downloads/ipipe/v4.x/arm/older/ipipe-core-4.1.18-arm-9.patch
>      >> +    - env:
>      >> +      - ARCH: x86
>      >> +        KERNEL_VERSION: 4.14.89
>      >> +        KERNEL_DEFCONFIG: x86_64_defconfig
>      >> +        IPIPE_URL:
>      >> https://xenomai.org/downloads/ipipe/v4.x/x86/ipipe-core-4.14.89-x86-2.patch
>      >> +    - env:
>      >> +      - ARCH: x86
>      >> +        KERNEL_VERSION: 4.4.166
>      >> +        KERNEL_DEFCONFIG: i386_defconfig
>      >> +        IPIPE_URL:
>      >> https://xenomai.org/downloads/ipipe/v4.x/x86/ipipe-core-4.4.166-x86-12.patch
>      >>
>      >
>      > Starting to process my backlog with adding this commit to next. I had to
>     create
>      > a mirror in github for that, but now we have
>      >
>      > https://travis-ci.com/xenomai-ci/xenomai
> 
>     Seems we have some tracing-related build issues. I suppose the default configs
>     are without tracing on, and that may trigger some issues.
> 
>     Did you test your commit separately as well?
> 
>     Regarding the other patches from your queue: Are there any updates pending?
> 
>     Jan
> 
>      >
>      > fed by
>      >
>      > https://github.com/xenomai-ci/xenomai
>      >
>      > which is automatically updated when I push to the official repo. When
>     everything
>      > runs smoothly, we likely want to set some links, maybe including a build
>     badge,
>      > in our docs.
>      >
>      > Thanks for starting this!
>      > Jan
>      >
> 
>     -- 
>     Siemens AG, Corporate Technology, CT RDA IOT SES-DE
>     Corporate Competence Center Embedded Linux
> 
> 

-- 
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux



More information about the Xenomai mailing list