[Xenomai] process behaviour when running xenomai
gilles.chanteperdrix at xenomai.org
Fri Mar 7 13:57:52 CET 2014
On 03/07/2014 11:14 AM, Robert Berger wrote:
> On 03/06/2014 11:46 AM, Huub Van Niekerk wrote:
>> I'm running Xenomai 2.6.3 with kernel 3.10.18 now on BeagleBoard-Xm Rev. C and experience this behaviour: when I try to install packages from commandline, the installation manager starts quick and reads the package(s), but after that it stays dead quiet like it's frozen. ps -ef shows it's just going on, no defunc or anything like that. Also, when I want to watch the processes using top, it starts, but nothing shows. When I want to end it, Ctl-C gives no response giving me no other option than to use kill. Is this a known behaviour when running Xenomai ?
> I tried something similar (just took the patch from the ELDK 5.5) but
> have some issues:
> 1) no network on the beagle-xm and even if I hack my way through with
> phy_nop it's not getting better
Have you selected an USB transceiver? This is a difference between 3.8
and 3.10, and is not enabled by default.
More information about the Xenomai